Vessels

Air pressure vessel

AP-1000 RYOSEI MARU


DATA

◎Environmentally-friendly ◎High work efficiency with energy saving
◎Safety of the site
Year Built 1996
Air feeder manufacturer Sekigahara Seisakusho Ltd.
Air feeder type Flap reciprocating type
Air feeder capacity 7.6 m3 (Flap inclination angle 95°)
Air feeder dimension Width:3,200 mm × Height:3,200 mm × Length:4,005 mm
Air feeder nominal capacity 1,600 m3/h
Air feeder discharge distance 3,000 m
Backhoe model HITACHI EX2500-5
Backhoe capacity 18 m3
Backhoe discharge capacity 1,600 m3/h
Main engine YANMAR 8N280L-SN (2,600 PS) × 2 pcs
Main generator YANMAR T240-ET (1,200 PS)
Aux. generator YANMAR 6CHL-N (74 PS)

Feature1

Environmentally-friendly

Lately preservation of water quality in the ocean is demanded. In reclamation, conventional pump system has a turbidity problem due to spill water. So, we came up with the idea of building an air pressure vessel with high efficiency considering environment and next generation. That can transfer the large volume of dredged soil, foreign material and clod that passed the hopper's grid, as they are without any additional water to the reclamation site with the help of air pressure. Reclamation by the air pressure vessel can prevent the pollution in the vicinity as spill water is reduced largely. Time to dry the reclamation site is shortened for faster land usage opportunity. We made a speedy and environmental-friendly reclamation available

Feature2

High work efficiency with energy saving

As kinetic energy of falling soil from hopper to transferrer via suction pipe affects the flap, it needs less power.
A large backhoe with sufficient discharging capability made high discharging volume with cost saving possible.
Operation method can be adjusted according to the conditions as soil type or discharging distance for high efficiency.
①Flap's movable range and speed can be set in the bridge.
②Flap's reciprocating time and pressure of hydraulic pressure and compressed air are indicated in bride monitor for good control.

    

Feature3

Safety of the site

According to the ordinance on Industrial Safety and Hygiene, handrails, safe passage and fences around the machinery are installed. Remote controlled transferrer and pull-barge-winch are monitored with surveillance camera.
For abnormal situation during operation, auto alarm and automatic stop kicks in. Emergency stop switch is installed near transferrer for manual stop.